Products
S-Weld Passivator Gel 2.5kg (6pk)
Callington S-Weld Passivator gel is a powerful oxidising gel for the passivation of stainless steel, duplex steel and Inconel alloys. S-Weld Passivator can be used following pickling, grinding or mechanical polishing of stainless steel to ensure a passive surface is obtained prior to installation or commissioning of the final product.
Gel consistency for ease of application
Enhancement of chrome oxide corrosion resistant (passive) layer
Dissolves any residual surface contamination
Improved quality of fabricated product
1. Surface should be pre-cleaned to remove oils and greases before applying passivating agent. Use Callington S-Weld Brite Wash. Any contamination will shorten the life of the passivating gel.
2. Stir the gel to ensure a smooth consistency and apply S-Weld Passivator using the acid resistant brush provided.
3. Application Times
Grade of Stainless Steel Temperature 20 - 38°C Temperature 50 - 70°C
200,300,400 Series 30 45 minutes 10 30 minutes
Duplex 30 45 minutes 10 30 minutes
Super Duplex 30 45 minutes 10 30 minutes
Inconel 625, 825 30 45 minutes 10 30 minutes
4. Rinse thoroughly with clean potable water, dry surfaces to prevent water staining (smut). If a neutralizing agent has been used this must be followed by rinsing again with clean potable water and surfaces should be dried to prevent water staining.
This product contains Nitric Acid and is corrosive and poisonous.
Wear appropriate chemical protective clothing, eye protection and breathing apparatus as necessary.
1. Wear PVC gloves, goggles, overalls and safety boots. Wear a respirator if working in confined or poorly ventilated area.
2. Avoid spillages and do not allow gel to come in contact with the body or eyes. Avoid breathing in the vapours.
3. If skin contact occurs, immediately flush body and/or clothes with water. Remove all contaminated clothing.
4. Replace the lid on the container tightly after use, and store upright in a cool dry area away from direct sunlight. Do not store or use below 5°C.
5. S-Weld Passivator has a recommended shelf life of twelve (12) months if stored as per above conditions (item 4).
| SKU | 113078 |
More From This Category
Albright Acidic Aluminium Brightener & Cleaner
From $179.00 Excl GST
($196.90 Incl GST)
or 4 payments of $44.75 with
Learn more
CalGuard Nozzle Dip 400g (12pk)
$94.56 Excl GST
($104.02 Incl GST)
or 4 payments of $23.64 with
Learn more
ZERO-SPAT® Nozzle Dipping Gel 400g (6PK)
$146.40 Excl GST
($161.04 Incl GST)
or 4 payments of $36.60 with
Learn more
Meta-Brite Metal Brightener & Stainless Steel Cleaner
From $90.15 Excl GST
($99.17 Incl GST)
or 4 payments of $22.54 with
Learn more
CalGuard Nozzle Dip 400g (12pk)
$84.00 Excl GST
($92.40 Incl GST)
or 4 payments of $21.00 with
Learn more
CT-ASL Anti-Spatter Heavy Duty
From $103.40 Excl GST
($113.74 Incl GST)
or 4 payments of $25.85 with
Learn more
DYE PENETRANT INSPECTION PENETRANT 354G/12.5OZ (BX OF 12)
$29.62 Excl GST
($32.58 Incl GST)
or 4 payments of $7.41 with
Learn more
